Homeworks academic service


Minerals of igneous and metamorphic rocks biology essay

Luster is a property of a mineral that tells how the mineral reflects light. Luster gives you an indication of how "Shiny" a mineral is. The two main ways that geologists categorize a mineral's luster is Metallic and Non-metallic. The luster of a mineral may differ from sample to sample.

  1. Types of metamorphism Contact metamorphism A contact metamorphic rock made of interlayered calcite and serpentine from the Precambrian of Canada.
  2. Today pencil "lead" is made of another mineral called graphite. Magnetite is an important source of iron ore and occurs in many igneous rocks.
  3. The photo above shows small pieces of metal fillings magnetically attached to magnetite!

Metallic minerals shine like metal, while non-metallic minerals vary greatly in their appearance. There are many different descriptions of non-metallic luster, we are going to discuss four.

They are pearly, earthy, vitreous glassyand greasy. Pearly luster is iridescent, glows like a pearl. Greasy luster looks like the mineral is covered with grease, the mineral definitely shines.

And so do we. Every day, we send the latest research to our 40,000+ subscribers.

Minerals with an earthy luster have a dull look with no shine. Minerals with an earthy luster look as though they are covered with dirt or dust. The photos above shows examples of these four lusters.

Minerals with a vitreous luster glassy look minerals of igneous and metamorphic rocks biology essay small pieces of a broken glass bottle Color is the easiest of the properties to see, but it is not always the best way to identify a mineral. Many minerals have more than one color because of impurities that were present during the formation of the mineral. Quartz is an example of a mineral with many different colors. Quartz can be clear, white, blue, brown, and almost black.

Amethyst is a quartz crystal with a purple color. The impurity that makes amethyst purple is manganese. A better determinant of the true color of a mineral is its streak. Streak is a test used by a geologist to see the color of the mineral under the top layer or coating on the mineral. The mineral is rubbed on a "streak plate", which is a piece of porcelain. When the mineral is rubbed across the streak plate some of the mineral is broken off and ground into a powder.

This allows the geologist to see under the outer layer which could have a different color due to the mineral being exposed to the atmosphere.

When minerals are exposed to the atmosphere, gasses like oxygen can chemically combine with the mineral to change its outer color. The photo above is showing a specimen of iron pyrite along with a streak plate showing the pyrite's streak. In 1822 a German scientist by the name of Frederick Mohs set up a scale to determine the approximate hardness of minerals.

He arranged the minerals in his scale from softest Talc to hardest Diamond. The minerals get increasingly harder as you read down the scale, but they do not increase in hardness at a constant rate.

Igneous rock

Calcite is not twice as hard as talc and a diamond is not 10 times harder than talc. In fact a diamond is over 40 times harder than talc. The line graph above shows you this relationship. This property like color is arbitrary because the hardness of a mineral varies slightly from one specimen to the next.

We can determine the approximate hardness of a mineral by running a group of tests.

  1. Image via Wiki Commons. This is why metamorphic rocks are important.
  2. Recrystallization of the rock will destroy the textures and fossils present in sedimentary rocks. The minute structures, however, disappear, often completely, if the thermal alteration is very profound.
  3. Talc can be ground up into talcum powder. Foliated rock is a product of differential stress that deforms the rock in one plane, sometimes creating a plane of cleavage.
  4. Galena is an important source of lead. There is a city in Russia by the name of Magnitogorsk that received its name because of the unusually high quantities and quality of magnetite found in the mountains surrounding the city.
  5. When a volcano erupts, it spews out hot molten rock called magma or lava.

Scratch the mineral in question with a fingernail, penny, iron nail, or glass slide. If the mineral shows a scratch mark from one of the testing materials the mineral is said to be less hard than the mineral that scratched it.

A piece of pink feldspar will not be scratched by a fingernail, penny, or an iron nail, but will be scratched by a glass slide. The feldspar is said to be harder than the first three testing materials but not as hard as the glass slide. You can use the following materials to run your own mineral hardness tests. Some minerals have a tendency to split or crack along parallel or flat planes. This property is easily seen in some minerals and you can test the mineral by breaking it with a hammer or splitting off sheets with a pen knife.

These planes along which the mineral breaks are called cleavage planes. If the mineral splits easily along these planes the mineral is then said to have perfect cleavage. Mica is a good example of perfect cleavage. Feldspar is an example of a mineral with cleavage in more than one direction. Quartz is a mineral that has no cleavage at all. Quartz shatters likes glass when struck with a hammer.

The types of rock: igneous, metamorphic and sedimentary

The biotite mica on the far left splits into sheets that are perfectly parallel. They form because of weak and strong bonds between the mica layers.

The feldspar breaks into two planes at consistent angles. Fracture is related to cleavage. Fracture occurs when a mineral breaks at random lines instead of at consistent cleavage planes. Many minerals that have no cleavage or poor cleavage fracture easily. The on the far right is a good example of a rock that has conchodial glass like fracture. Quartz is a mineral that also has conchodial fracture.

Only two minerals on earth are magnetic. They both have high quantities of iron. Magnetite is one of the magnetic minerals and pyrrhotite is the other.

Magnetite was used by ancient sailors for compasses. They would chip off needles of magnetite and float them on water and watch the needle point to the north. The photo above shows small pieces of metal fillings magnetically attached to magnetite!

The rock is a natural magnet!

Composition

Calcite is pure calcium carbonate CaCO3. It is found in limestone and marble. It is the cementing agent that binds sediments together into sedimentary rocks. Marble is metamorphosed changed by heat and pressure limestone. The crystals formed from pure calcite are in the form of a perfect rhomboid.

A rhomboid is a six-sided solid object in which the opposite sides are parallel. It has perfect cleavage in three directions. If you hit calcite with a hammer it will break into smaller but perfectly shaped rhomboids. Calcite is number two on Mohs hardness scale. Calcite is the material that forms stalactites and stalagmites in caves. Calcite is used as a fertilizer, cement, chalk, building stone, and for the manufacture of optical instruments.

Talc is a mineral that has perfect cleavage and a greasy or soapy feel. It is given the distinction of being number 1 on Mohs hardness scale. Talc is also called soapstone which is used by artists for sculptures.

Talc can be ground up into talcum powder. Ground talc is also used to make crayons, paint, paper, and soap. Talc is quarried in many Northeastern states of the United States. Hematite is the most important source of iron ore in the world. The production of iron has been important to nations of the world for over 2500 years. Today the addition of other minerals to iron has minerals of igneous and metamorphic rocks biology essay to the production of steel which is vital to the economy of the major countries on Earth.

Hematite has a red or black color but the streak is always red. The iron in the hematite turns red when it comes in contact with water and oxygen. In other words this rock is rusted!! Hematite has a metallic or earthy luster. The hardness of hematite is about 5 on Mohs hardness scale. It has no cleavage and breaks with an uneven fracture. The reddish landscape of Mars is due to the oxidized iron on its surface. This tells us that water and oxygen must have been present on Mars at one time.

Small deposits are found in many states of the union. Canada and Russia are leading countries in the mining of iron ore. Magnetite is a mineral that has a very high iron content. Magnetite has a black or brownish-red color and a black streak.

Soil Types: Igneous, Sedimentary and Metamorphic Rocks

It has a hardness of about 6 on the Mohs hardness scale. It is one of two minerals in the world that is naturally magnetic. Magnetite, also known as lodestone, is found throughout the United States. Magnetite is an important source of iron ore and occurs in many igneous rocks.

There is a city in Russia by the name of Magnitogorsk that received its name because of the unusually high quantities and quality of magnetite found in the mountains surrounding the city. Galena is an important source of lead.